Lithium Foil (0.02 mm thick x 80mm W x 5000 mm L) for Li-ion Battery R&D, 4g/bag - MF-Li0028

• 0.534 g/cm3

• Silver

• 0.02mm thick x 80mm wide, roughly 5 meters long 

Lithium: 99.9%        Sodium: 0.020%        Potassium: 0.005%

Calcium: 0.020%     Iron: 0.005%              Nitrogen: 0.020%

Silicon: 0.008%       Chlorine: 0.006%       Aluminum: 0.005%

Nickel: 0.003%        Copper: 0.004%         Magnesium: 0.010%

• 4g/bag

• sealed in Al bag with filled Ar

• Clean the surface of the lithium foil using a nylon brush/stainless steel scalpel until a shiny silvery surface appears (inside an argon glovebox).

• The package must be opened and stored inside a glove box with Argon Gas and moisture less than 8 ppm and O2 less than 2 PPM.   Never use N2 gases in the glovebox!!!
• Vacuum overpressure may blow the package during antichamber transfer. [only half range of vacuum for more times]
• No return or refund for misusing or wrong storage which causes The lithium foil oxidation

• We reserve the right to charge an additional handling fee due to special shipping/handling requirements.
• Operation and Storage: Lithium is very active in the air, please carefully read the SDS carefully.
• Lithium foil may be oxidized during handling and storage.  if you find any oxidation on the surface of the Li-foil,  please use a nylon brush/stainless steel scalpel to remove it before using it.
• If customer want to use lithium foil in dryroom, surface protective thin layers can be obtained by slot-die coating method. Please refer the related paper: High rate and stable cycling of lithium metal anode
• If you would like to thinner foil,  please consider using the rolling machine.