Lithium Foil (0.75 mm thick x 19mm W x 3000 mm L) for Li-ion Battery R&D, 22g/bag -MF-Li25

99.9% Lithium

180.5 °C 

0.534 g/cm3

Silver

0.75mm thick x 19mm wide, roughly 3 meters long 

22g/bag

sealed in Al bag with filled Ar

Clean the surface of the lithium foil using a nylon brush/stainless steel scalpel until a shiny silvery surface appears (inside an argon glovebox).

The package must be opened and stored inside a glove box with Argon Gas and moisture less than 8 ppm and O2 less than 2 PPM. Never use N2 gases in the glovebox!!!

Vacuum overpressure may blow the package during antichamber transfer. [only half range of vacuum for more times]

No return or refund for misusing or wrong storage which causes The lithium foil oxidation

MTI does not accept international orders due to restrictions on hazard material exportation!!!

MTI reserves the right to charge an additional handling fee due to special shipping/handling requirements.

Operation and Storage: Lithium is very active in the air, please carefully read the SDS carefully.

Lithium foil may be oxidized during handling and storage. if you find any oxidation on the surface of the Li-foil, please use a nylon brush/stainless steel scalpel to remove it before using it.

If the Li metal is stored in mineral oil, please refer to this guide on How to clean mineral oil off Lithium metal using anhydrous Toluene

If you would like to thinner foil, please consider using the rolling machine by DIY

Bench-Top Fume Hood with Lamp & Blower with optional Carbon-filled Enclosures, 45"x 25" x 41", W x D x H-- FH36