1
/
of
1
MTI Corporation
Li-Ion Battery Cathode - Aluminum Foil Single Side Coated by LiFePO4 (LFP, 241mm L x 200mm W x 84um Thickness) 5 sheets/bag - bcaf-lpfss
Li-Ion Battery Cathode - Aluminum Foil Single Side Coated by LiFePO4 (LFP, 241mm L x 200mm W x 84um Thickness) 5 sheets/bag - bcaf-lpfss
This electrode sheet is based on Aluminum foil coated by lithium iron phosphate (LiFePO4, LFP) in single side and is used as the cathode of Li-Ion battery - 5 sheets /bag
Note: This electrode sheets and its parameters were updated from Oct. 2023.
SPECIFICATIONS
-
Current collector (substrate): Aluminum foil (16 microns)
-
Cathode material: lithium ferrous phosphate (coated by carbon)
- Length: 241mm, Width: 175mm ( The edge width of blank area is 12.5 mm for each side)
- Single Side Coating Area Density: 13.5±0.2 mg/cm2
- Compaction Density of Coating: 2.0±0.1g/cm3
- Current Collector Area Density: 4.22 mg/cm2
- Coating thickness: ~68 um
- Total Thickness: ~84 um (after hot calendaring)
- Active Material Weight: 5.43 g
- Active Material Ratio in powder: 95.4% (PVDF and Super P is 2% and 2.6%, respectively)
- Specific Capacity: 150 mAh/g (Area Capacity: 1.932 mAh/cm2); 0.1 C; 2.5-3.7 V; Electrolyte: 1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC
- Charging and Discharging Curve for the First Cycle
- Rate Testing
- Cycling Test
- Note: Please vacuum heated dry (100oC) before assembling the battery
Please click the video below to see how
MTI's slitting machine preparing Please click the video below to see how
the electrode of cylinder batteries MTI's MSK-T-10 disc and ring cutter to cut the electrode sheet

MTI's slitting machine preparing Please click the video below to see how
the electrode of cylinder batteries MTI's MSK-T-10 disc and ring cutter to cut the electrode sheet


Share
